Unfortunately, there is a lot of misinformation online about steel detailing. Whether you require structural steel detailing services or would simply like to learn more about steel drafting and detailing, we have debunked 5 common myths below to clear up any misconceptions you may have heard.
Myth 1: Fabricators do not require steel detailing services
Some individuals are under the impression that if a structural engineer has produced a drawing stating the sizes and forces of a steel structure, and an architect has created a drawing outlining the layout, this is all the information a fabricator requires to produce accurate steelwork. This, however, is false and a fabricator is unable to produce and complete steelwork based on either or both of these drawings.
In order for a fabricator to complete their steelwork, they require a general assembly drawing and single part drawings created by steel detailing services.
Myth 2: Steel detailing can only happen once a conceptual design is finalised
Steel detailing can begin throughout a conceptual design phase as understanding how steel parts and components can be put together and combined can help to guide a design team to create a practical conceptual design. Without the input and advice of a steel detailing company throughout a project, there is a risk a design concept will be finalised that cannot be fabricated. It, therefore, is a better choice to collaborate with a steel detailing company throughout the process of designing a structure.
Myth 3: Assembly drawings must show all plate dimensions
It is a common misconception that assembly drawings must show all plate dimensions. It is not necessary for an assembly drawing to show all plate dimensions providing the dimensions that are included are presented in a manner that shows how all parts can be welded together. It is only essential, therefore that assembly drawings show the welded item and how it is made up of multiple single parts espanolfarm.com/.
Myth 4: There is no relationship between steel detailing and safety
The relationship between steel detailing and health and safety is very strong as steel detailing designs are an assessment of how stable and secure a design is. Steel detailing engineers will consider external and internal forces that may affect the stability of a structure and analyse how materials and other factors will impact the steel structure. Steel detailing can raise red flags and concerns in elements of a design that may not be 100% safe, secure and able to meet its requirements.
Myth 5: Single part drawings only need to state the size of cut dimensions.
While it is true that single part drawings must state the size of cut dimensions, there is other important information that must be included in single part drawings to allow holes to be cut and punched accurately based off the single part drawings. Other information that should be included in a single part drawing includes the position and dimension of all holes, the size of the section, the quantity/number of each part.
Contact Restoric Design
If you are overwhelmed by the amount of information online about steel detailing and would like help deciphering fact from fiction, contact Restoric Design today. Founded in 2007, for over 13 years we have been a leading steel detailing company and utilise our industry expertise and experience in everything we do. If you’d like to learn more about our steel detailing services, please do not hesitate to get in touch with a member of our expert engineering team today. A member of our steel detailing team would be happy to answer any questions you may have.