01462 514 300 [email protected]

See below all our CAD Services categorised by process Contact Us

Our CAD Services by Process & Application

The process of producing a CAD Model & Drawing differs depending on the application. The process of steel detailing requires a very different skill set & software to for example MEP coordination. Thanks to our years of experience in this industry, we have an excellent understanding in choosing correct process depending on the required deliverable. It is vital for us to understand what the information we produce will be used for. Understanding the end requirement enables us to select the most efficient process to produce the right deliverable.

2D Drafting

There are two fundamental computer-aided design (CAD) systems. There is software that focuses on 2D Drafting and software for 3D Modelling (and the developed 2D drawings). 2D Drafting is the method of using 2D CAD Software such as AutoCAD…

2D to 3D Conversion

2D to 3D CAD conversion is the process of converting 2D Technical drawings into 3D CAD Models. 2D drawings are drawing in the x and y-axis where a 3D CAD Model has the additional z-axis. The difference between a square and a cube…oftware such as AutoCAD…

3D CAD Modelling

There are two fundamental computer-aided design (CAD) systems. There is software that focuses on 2D Drafting and software for 3D Modelling (and the developed 2D drawings). 3D CAD modelling is…

BIM Services

A Building Information Model is an intelligent 3D CAD model. The intelligent model (compared to a dumb model) will have additional information within the CAD model besides its geometric shape…

MEP Co-ordination

Jensen Consulting offers a Mechanical, Electrical and Plumbing (MEP) coordination service. MEP coordination is the process of producing a 3D CAD Model (BIM) of all mechanical, electrical an plumbing services as to the MEP consultants drawings…

Reverse Engineering Service

Reverse Engineering is a term used to describe the process of reconstructing an existing product accurately, for the purpose of manufacturing more of the same kind or modifying it to improve upon its design…

Steel detailing Service

Steel detailing is the drafting process used to assist the fabrication of hot & cold rolled steel. A steel detailer uses the structural engineers’ drawings, architects drawings to produce a 3D CAD Model…

Paper to CAD Conversion

Paper to CAD is the procedure converting Paper Drawings (physical or scanned) into 3D CAD models and/or 2D Drawings. Companies often have libraries of drawings or individual parts which were created prior to CAD (or 3D CAD)…

About Us

We are one of the leading CAD Drafting Services in the UK. Our company has huge experience in 3D CAD Modelling and 2D CAD Drawings.

Privacy Policy

Google Rating
5.0

Address

Jensen Consulting Ltd.
67 Knowl Piece
Hitchin
Hertfordshire SG4 0TY
Tel: 01462 514 300
Email:
[email protected]

About Us

We are one of the leading CAD Drafting Services in the UK. Our company has huge experience in 3D CAD Modelling and 2D CAD Drawings.

Address

Jensen Consulting Ltd.
67 Knowl Piece
Hitchin
Hertfordshire SG4 0TY
Tel: 01462 514 300
Email:
[email protected]