01462 514 300 [email protected]

UK based Steel Detailing Service

Outsource your architectural and structural steel drafting requirements to us Contact UsEmail us

What is Steel Detailing?

Steel detailing is the drafting process used to assist the fabrication of hot & cold rolled steel. A steel detailer uses the structural engineers’ drawings, architects drawings to produce a 3D CAD Model using specialist steel drafting software such as Tekla & Advance Steel. From the 3D CAD model, the CAD Technician will produce a set of clear, unmistakable and accurate drawings for the purpose of steelwork fabrication.

What is Steel Detailing?

Steel detailing is the drafting process used to assist the fabrication of hot & cold rolled steel. A steel detailer uses the structural engineers’ drawings, architects drawings to produce a 3D CAD Model using specialist steel drafting software such as Tekla & Advance Steel. From the 3D CAD model, the CAD Technician will produce a set of clear, unmistakable and accurate drawings for the purpose of steelwork fabrication.

What is Steel Detailing used for?

How do we detail steel work?

At Jensen Consulting we use Autodesk Advance Steel as our preferred steel detailing CAD software package for the fabrication industry. Our steel detailers work closely with fabricators, architects, structural engineers and installers to guaranty a successful project.

We will set out the steelwork 3D CAD Models as to the architects’ drawings and size the sections as the structural engineer’s drawings. Based on the 3D Steel Model we will produce a General Assembly Drawing for approval. Once approval has been gained by the relevant parties a full set of Fabrication Drawings is produced.

What is Steel Detailing used for?

Steel detailing is the process of producing Fabrication Drawings. Fabrication drawings are a specific type of drawing. used by the Fabrication Industry to produce steel members. The drawings will specify steel section sizes, length, hole locations etc. Further, they will contain the information for the steel erectors to assemble the steel. Fabrication Drawings are usually used for 1 off’s or per job/project bases (compared to Manufacturing Drawings). They are mainly used in:

  1. Structural Steel
  2. Sheet Metal
  3. Architectural Steelwork
  4. Ballustrading/Handrails
  5. Stairs
  6. Platforms

What is Steel Detailing used for?

How do we detail steel work?

At Jensen Consulting we use Autodesk Advance Steel as our preferred steel detailing CAD software package for the fabrication industry. Our steel detailers work closely with fabricators, architects, structural engineers and installers to guaranty a successful project.

We will set out the steelwork 3D CAD Models as to the architects’ drawings and size the sections as the structural engineer’s drawings. Based on the 3D Steel Model we will produce a General Assembly Drawing for approval. Once approval has been gained by the relevant parties a full set of Fabrication Drawings is produced.

What is Steel Detailing used for?

Steel detailing is the process of producing Fabrication Drawings. Fabrication drawings are a specific type of drawing. used by the Fabrication Industry to produce steel members. The drawings will specify steel section sizes, length, hole locations etc. Further, they will contain the information for the steel erectors to assemble the steel. Fabrication Drawings are usually used for 1 off’s or per job/project bases (compared to Manufacturing Drawings). They are mainly used in:

  1. Structural Steel
  2. Sheet Metal
  3. Architectural Steelwork
  4. Ballustrading/Handrails
  5. Stairs
  6. Platforms

Structural Steel Drawings

Our team of steel detailers produce fabrication drawings of structural steel such as portal frames, roofs, floors and platforms. A set of fabrication drawings includes GA Drawing, Assembly & Single Part Drawings, Material & Bolt lists as well as NC files.

Structural Steel Drawings

Our team of steel detailers produce fabrication drawings of structural steel such as portal frames, roofs, floors and platforms. A set of fabrication drawings includes GA Drawing, Assembly & Single Part Drawings, Material & Bolt lists as well as NC files.

Architectural Steelwork Drawings

Our great team of steel detailers produce 3D CAD Models using Advance Steel or Solidworks of Staircases, Balustrading & Handrails. The 3D CAD Models are the basis for a full set of Fabrication Drawings including material lists.

Architectural Steelwork Drawings

Our great team of steel detailers produce 3D CAD Models using Advance Steel or Solidworks of Staircases, Balustrading & Handrails. The 3D CAD Models are the basis for a full set of Fabrication Drawings including material lists.

Why use Jensen Consulting

  • Fixed price quotation for steel detailing
  • A highly knowable team of steel detailers
  • Clear and concise fabrication drawings

Send us the information today

Based on the information you send us we can provide you with a fixed price quotation within 24 hours.

Why use Jensen Consulting

  • Fixed price quotation for steel detailing
  • A highly knowable team of steel detailers
  • Clear and concise fabrication drawings

Send us the information today

Based on the information you send us we can provide you with a fixed price quotation within 24 hours.

Latest related CAD News

About Us

We are one of the leading CAD Drafting Services in the UK. Our company has huge experience in 3D CAD Modelling and 2D CAD Drawings.

Privacy Policy

Google Rating
5.0

Address

Jensen Consulting Ltd.
67 Knowl Piece
Hitchin
Hertfordshire SG4 0TY
Tel: 01462 514 300
Email:
[email protected]

About Us

We are one of the leading CAD Drafting Services in the UK. Our company has huge experience in 3D CAD Modelling and 2D CAD Drawings.

Address

Jensen Consulting Ltd.
67 Knowl Piece
Hitchin
Hertfordshire SG4 0TY
Tel: 01462 514 300
Email:
[email protected]