Is this your situation?

It can be hard to justify a full time CAD technician

Are you are letting down your clients as you do not have a reliable CAD resource? Have you tried an array of solutions? You know you need to produce good quality CAD drawings on a regular basis but can’t justify another salary. There are not 40 hours of CAD work per week on a regular basis to employee someone else. There might only be 4, 8 or even 16 hours a week. To conclude the best option will be hiring a Part time CAD technician for your business. If you are interest you can contact us on 01462 514 300.

Contractors want continuous work

You could get a freelancer/CAD Contractor either via an agency or direct. They would request continued work. The contractor or agency will want 5 days per week with a certain committal for a few months. The agency would like their fees.

You could train an in-house staff member in CAD

We have often seen existing staff members receiving CAD training to deal with occasional CAD work. They are sent off to training for a few days and are then expected to deal with the CAD requirements of the company. The issue is that they will only use CAD occasionally, which then results in their already very limited time (due to their other commitments) being spent on refreshing their training than actually carrying out the CAD work.

Can be difficult to justify the software and hardware investment

Personnel cost is one thing, a CAD Workstation is substantially more expensive than a standard office PC. At Jensen Consulting we pay between £2,000 to £3,000 for our standard CAD Workstations. In addition to that, there is the CAD Software which can easily run into five figures depending on requirements (Solidworks & AutoCad setup).

Our CAD Technician & Consultants will visit your company based in

  • Hertforshire
  • Cambridgeshire
  • Bedfordshire
  • London

Book a consultant to visit and advise you for free

We will carry out an initial visit to establish your requirements and advise a solution to meet your needs.

Imagine a Part Time CAD Services Technician like a Part-Time Book-keeper

We will visit your site on a regular basis

We will visit your premises on a regular basis. Lets say every Tuesday and work through your work load.

A manager will visit periodically for free to assess the processes and make suggestion for improvements.

We will visit most companies in:

  • Hertfordshire
  • Bedfordshire
  • Cambridgeshire
  • London

We are a team of CAD experts

With Jensen Consulting you don’t just get a Part Time CAD Services Technician who sits and integrates with your team, you get the whole knowledge and experience of the full Jensen Consulting team. Our team members when on site will still work with their team members in our main office. If there is a query or a similar project they will utilise this to assist the work on site.

We come with hardware & software

We have dedicated mobile workstations for our Part Time CAD Services Technicians. Depending on our clients software requirements the workstations will be pre-loaded with a licenses version of:

  • AutoCad for most 2D work
  • Advance Steel for fabrication
  • AutoCad MEP, Plant & Revit for Building Information Modelling (BIM)
  • Solidworks for 3D Mechanical Design applications.

The advantages of a Part-Time CAD agency

  • Cheaper than a full-time employee with no long-term commitments
  • Freelancers & contractors are unlikely to commit to part-time work with no minimum contract length
  • We can supply hardware & software such as AutoCAD, Solidworks & BIM Software
  • No minimum contract fee
  • Initial and continued assessments by our consultants to enhance your CAD processes as part of our service
  • Back-office support by our whole CAD Team including all our CAD libraries