01462 514 300 [email protected]

Staircase fabrication drawings

How did our Fabrication Drawing Team assist our costumer?

We were presented with a set of drawings from the Architect. After reviewing them an initial site visit was carried out in London. We quickly identified that the initial drawings provided where not sufficient and lacked detail, such as important measurements, as well as fabrication issues. While there we reviewed the drawings that were on site and took some notes. We then took some of our own measurements to assist with the design.

Due to the coordination efforts of our CAD Services we where able to produce a GA Drawing which considered all of the issues. Based on the GA Drawing(which included a Set-Out Drawing) comments where made by the Architect and changes were then implemented.

 After approval of the GA Drawing by the Client & Structural Engineering Company a full set of Fabrication Drawings was produced.

Why did our customer require a fabrication drawing company?

Our customer,  a steel fabrication company based in the Hertfordshire was commissioned to fabricate a new stair case for a new gym in London.  We where presented with the outline architectural drawing and where scoped to produce the Fabrication Drawings.

How did our Fabrication Drawing Team assist our costumer?

We were presented with a set of drawings from the Architect. After reviewing them an initial site visit was carried out in London. We quickly identified that the initial drawings provided where not sufficient and lacked detail, such as important measurements, as well as fabrication issues. While there we reviewed the drawings that were on site and took some notes. We then took some of our own measurements to assist with the design.

Due to the coordination efforts of our CAD Services we where able to produce a GA Drawing which considered all of the issues. Based on the GA Drawing(which included a Set-Out Drawing) comments where made by the Architect and changes were then implemented.

 After approval of the GA Drawing by the Client & Structural Engineering Company a full set of Fabrication Drawings was produced.

Why did our customer require a fabrication drawing company?

Our customer,  a steel fabrication company based in the Hertfordshire was commissioned to fabricate a new stair case for a new gym in London.  We where presented with the outline architectural drawing and where scoped to produce the Fabrication Drawings.

About Us

We are one of the leading CAD Drafting Services in the UK. Our company has huge experience in 3D CAD Modelling and 2D CAD Drawings.

Privacy Policy

Google Rating
5.0

Address

Jensen Consulting Ltd.
67 Knowl Piece
Hitchin
Hertfordshire SG4 0TY
Tel: 01462 514 300
Email:
[email protected]

About Us

We are one of the leading CAD Drafting Services in the UK. Our company has huge experience in 3D CAD Modelling and 2D CAD Drawings.

Address

Jensen Consulting Ltd.
67 Knowl Piece
Hitchin
Hertfordshire SG4 0TY
Tel: 01462 514 300
Email:
[email protected]