01462 514 300 [email protected]
Select Page

Staircases and balustrade for a Hotel

Our Client

Our client is a fabricator based in Leeds. They were appointed to fabricate and install staircases and balustrade to an existing frame. The existing frame required a survey as deviations where found compared to the supplied drawings. 

Our Service

Our scope of works was to produce fabrication drawings of the balustrade and staircases. From the architectural drawings in conjunction with the survey information from we produced a 3D CAD Model using Autodesk Advance Steel. The architectural drawings were used for the balustrade details. The structural engineers drawings were used for section sizes. The challenge of this project was that the existing frame was not as to the drawings provided. Therefore the frame required a survey. Based on the survey the stairs required a re-design in accordance with Approved Document K. 

 

Our Output

Based on the 3D CAD Model we produced a General Assembly drawing for approval. The GA drawings shows all the beam location and sizes. Further, our GA drawings show all the connection details. This allows the architect and structural engineer to understand our design fully and comment/approve.

Once approval of the GA drawing was given, we produced the fabrication pack. The fabrication pack consisted of:

  1. General Assembly Drawing issued for construction. This drawing includes all relevant views (Plan, Elevation, Iso metric) with dimensions and beam numbers
  2. Assembly Drawing for welding
  3. Single Part Plate drawings for laser cutting
  4. Material List
  5. Bolt & Anchor List
  6. Erection Bolt List (bolt list assorted to each beam)
  7. NC & DXF files for pre-cutting

Weight

Time

Drawings

More Information

Steel Detailing

Steel detailing is the drafting process used to assist the fabrication of hot & cold rolled steel. A steel detailer uses the structural engineers’ drawings, architects more

Advance Steel

Autodesk Advance Steel is used by steel detailers to produce 3D CAD models of structural steel, staircases, balustrading and platforms. The 3D CAD Models are the more

Fabrication Drawings

Fabrication drawings are a specific type of drawing. used by the Fabrication Industry to produce steel members. The drawings will specify steel section sizes, length, hole more

How to choose the right steel detailing company

How to choose the right steel detailing company

The drafting process known as steel detailing involves moving from the structural engineers’ drawings (or sometimes, architects' drawings) to a 3D CAD model. The software employed to produce this technical model is specialist in nature: Tekla is a good example. In...

3 of the biggest trends to hit architectural steelwork in 2020

3 of the biggest trends to hit architectural steelwork in 2020

With every new year comes a brand new set of trends to push designers and builders. As such, the business of architectural steelwork is set to hit a renaissance and, with it, this means new challenges for those in the business of architectural steel drafting and...

Choosing the best steel detailing company for your upcoming project

Choosing the best steel detailing company for your upcoming project

Nobody can deny the importance of a steel detailing company for successfully completing a construction project. Without a steel drafting expert to produce structural steel drawings, a construction project will result in failure before it's even begun! When it comes to...

About Us

We are one of the leading CAD Drafting Services in the UK. Our company has huge experience in 3D CAD Modelling and 2D CAD Drawings.

Privacy Policy

Google Rating
5.0

Address

Jensen Consulting Ltd.
67 Knowl Piece
Hitchin
Hertfordshire SG4 0TY
Tel: 01462 514 300
Email:
[email protected]

About Us

We are one of the leading CAD Drafting Services in the UK. Our company has huge experience in 3D CAD Modelling and 2D CAD Drawings.

Address

Jensen Consulting Ltd.
67 Knowl Piece
Hitchin
Hertfordshire SG4 0TY
Tel: 01462 514 300
Email:
[email protected]