01462 514 300 [email protected]

Structural Steel Frame for a residentual house

Our Client

Our client is a fabricator based in Cambridgeshire. They were appointed to fabricate and erect a frame for a two story detached house. The design of the house was very contemporary due to the setting of the building. The roof alone consisted of 4 pitches.

Our Service

Our scope of works was to produce structural steel fabrication drawings. From the architectural drawings in conjunction with the detail from the structural engineer we produced a 3D CAD Model using Autodesk Advance Steel. The architectural drawings were used for setting out the beams and columns. The structural engineers drawings were used for beam sizing and connection design. The challenge of this project was the 4 roof pitches. Using multiple pitches results in using compound angle for the beams and non-standard beam to beam connections.

 

Our Output

Based on the 3D CAD Model we produced a General Assembly drawing for approval. The GA drawings shows all the beam location and sizes. Further, our GA drawings show all the connection details. This allows the architect and structural engineer to understand our design fully and comment/approve.

Once approval of the GA drawing was given, we produced the fabrication pack. The fabrication pack consisted of:

  1. General Assembly Drawing issued for construction. This drawing includes all relevant views (Plan, Elevation, Iso metric) with dimensions and beam numbers
  2. Assembly Drawing for welding
  3. Single Part Plate drawings for laser cutting
  4. Material List
  5. Bolt & Anchor List
  6. Erection Bolt List (bolt list assorted to each beam)
  7. NC & DXF files for pre-cutting

Weight

Time

Drawings

More Information

Steel Detailing

Steel detailing is the drafting process used to assist the fabrication of hot & cold rolled steel. A steel detailer uses the structural engineers’ drawings, architects more

Advance Steel

Autodesk Advance Steel is used by steel detailers to produce 3D CAD models of structural steel, staircases, balustrading and platforms. The 3D CAD Models are the more

Fabrication Drawings

Fabrication drawings are a specific type of drawing. used by the Fabrication Industry to produce steel members. The drawings will specify steel section sizes, length, hole more

How CAD software is revolutionising the architecture industry

Very few creative industries have been untouched by the digital revolution of the last three decades or so. Typewriters meant one single mistake saw you throwing away an entire page; film editing used to be cut and sliced with a razor and tape;...

5 key benefits of using AutoCAD

AutoCAD is a highly effective and proven model of industrial efficiency and offers a great deal of versatility. This has caused it to become the favourite tool of a variety of professionals throughout a wide group of divergent industries. A...

About Us

We are one of the leading CAD Drafting Services in the UK. Our company has huge experience in 3D CAD Modelling and 2D CAD Drawings.

Privacy Policy

Google Rating
5.0

Address

Jensen Consulting Ltd.
67 Knowl Piece
Hitchin
Hertfordshire SG4 0TY
Tel: 01462 514 300
Email:
[email protected]

About Us

We are one of the leading CAD Drafting Services in the UK. Our company has huge experience in 3D CAD Modelling and 2D CAD Drawings.

Address

Jensen Consulting Ltd.
67 Knowl Piece
Hitchin
Hertfordshire SG4 0TY
Tel: 01462 514 300
Email:
[email protected]